Unitree H2 Plus SMART Humanoid Robot
સ્ટોકમાં
- બ્રાન્ડ:
- UNITREE ROBOTICS
- મોડલ:
- H2 PLUS SMART
- ORIGIN:
- ચીન
- Warranty:
- 12 MONTHS
- AVAILABILITY:
- SUBJECT TO AVAILABILITY
- SKU:
- Unitree-H2-PLUS-SMART
Unitree H2 Plus SMART Humanoid Robot
The SMART trim answers one question: where does your model run? If the answer is "on the robot", this is the trim that makes it possible — and it is still cheaper than every Ultimate configuration.
What it is
The Unitree H2 Plus SMART is the compute trim of the full-size H2 Plus platform: the same 1.82 m, roughly 70 kg bipedal frame with 31 body joints, upgraded with an NVIDIA Jetson Thor module carrying 128 GB of LPDDR5X memory and triple onboard compute split across platform control, user development and AI workloads. It is supplied without dexterous hands.
Three trims: Standard, SMART, Ultimate
Every H2 Plus shares one body. What separates the trims is compute and hands, in that order.
| Trim | Compute | Hands |
|---|---|---|
| Standard | Dual Intel computing, Wi-Fi 6, Bluetooth 5.2, OTA updates | None — the bare development platform |
| SMART | Adds NVIDIA Jetson Thor with 128 GB LPDDR5X and triple onboard compute, split across platform control, user development and AI workloads | None |
| Ultimate | As SMART | One of fourteen hand packages, A to N |
So the decision is sequential. Buy Standard if you are supplying your own compute and end effectors. Buy SMART if you intend to run large models on the robot but will fit hands later or not at all. Buy an Ultimate if you want the robot complete, and then the only remaining question is which hands.
Why onboard compute is the upgrade that matters
Onboard compute decides what the robot can think about without help. A tethered robot streaming sensor data to a workstation is a perfectly valid research setup, but it is not an autonomous one, and a growing share of this field — vision-language-action models, learned manipulation policies, on-robot reinforcement learning — needs inference to happen at control rates on the machine itself.
That is what the Jetson Thor module and 128 GB of memory buy. Triple onboard compute also means your development workload is not competing with the platform's own control loop for cycles, which is a practical advantage that is easy to overlook until it bites.
The fourteen hand options
Listed cheapest first. Total degrees of freedom is simply the 31 body joints plus twice the hand figure, which is why the range runs from 33 to 75.
| Config | Hands | DOF per hand | Tactile | Total DOF |
|---|---|---|---|---|
| Ultimate A | Dex1-1 Advanced two-finger grippers | 1 | No | 33 |
| Ultimate F | BrainCo Revo 2 Basic five-finger hands | 6 | No | 43 |
| Ultimate B | Unitree Dex3-1 three-finger dexterous hands | 7 | No | 45 |
| Ultimate C | Unitree Dex3-1 three-finger dexterous hands with tactile sensing | 7 | Yes | 45 |
| Ultimate G | BrainCo Revo 2 Touch five-finger hands | 6 | Yes | 43 |
| Ultimate H | Inspire DFQ five-finger hands | 6 | No | 43 |
| Ultimate I | Inspire E2 five-finger hands with tactile sensing | 6 | Yes | 43 |
| Ultimate D | Unitree Dex5-1 dexterous hands | 16 | No | 63 |
| Ultimate E | Unitree Dex5-1 dexterous hands with tactile sensing | 16 | Yes | 63 |
| Ultimate M | Wuji Hand 2 dexterous hands | 20 | No | 71 |
| Ultimate J | BrainCo Revo 3 Basic Senyun hands | 21 | No | 73 |
| Ultimate K | BrainCo Revo 3 Touch Senyun hands with tactile sensing | 21 | Yes | 73 |
| Ultimate L | BrainCo Revo 3 Vision Senyun hands with vision-tactile sensing | 21 | Yes | 73 |
| Ultimate N | SharpaWave tactile five-finger dexterous hands | 22 | Yes | 75 |
Hands are the single largest cost variable in this range — the gap between the A and N configurations is larger than the price of the Standard robot. Choose from what the robot actually has to do, and ask us before assuming more axes is better.
Unitree H2 Plus SMART specifications
| Specification | Value |
|---|---|
| Height | 1,820 × 456 × 218 mm standing |
| Weight | About 70 kg with battery |
| Body joints | 31 — 7 per arm, 6 per leg, 3 waist, 2 head |
| Joint torque | 120 N·m peak at the arm joints, 360 N·m at the leg joints |
| Payload | 7 kg rated, 15 kg peak |
| Structure | Aircraft-grade aluminium, titanium alloy and high-strength engineering plastics |
| Actuation | Low-inertia internal-rotor PMSM motors with crossed roller bearings |
| Hands | None — available separately or pre-fitted on Ultimate configurations |
| Compute | NVIDIA Jetson Thor with 128 GB LPDDR5X, plus dual Intel computing; triple onboard compute across platform control, user development and AI workloads |
| Total degrees of freedom | 31 body joints |
| AI platform | NVIDIA Isaac GR00T reference platform |
| Perception | Binocular head camera with 140° horizontal field of view; LiDAR optional |
| Connectivity | Wi-Fi 6, Bluetooth 5.2, OTA updates |
| Battery | Smart quick-release lithium battery, 15 Ah, about 3 hours |
| Development | Documented interfaces for secondary development |
Figures follow published specifications for this configuration and vary by production batch. Confirm the exact build on your quotation before ordering.
Who buys it
- Embodied-AI groups running large models on the robot
- Teams deploying vision-language-action and learned manipulation policies
- On-robot reinforcement learning and autonomy research
- Integrators who want the full compute stack but their own end effectors
- Buyers who will fit hands later, or not at all
How to choose
Buy SMART if models will run onboard and you do not need factory-fitted hands. Drop to the Standard trim if you are supplying your own compute or your work is locomotion rather than perception. Step up to an Ultimate configuration to have one of fourteen hand packages fitted — note that the Ultimate A costs only a little more than SMART, because a pair of Dex1-1 grippers is the least expensive hand option in the range. Compare the whole field in our humanoid robots category.
Safety and standards
Be clear-eyed about this one. The H2 Plus is 1.82 m tall, weighs about 70 kg and has leg joints rated to 360 N·m. That is a machine with the mass of an adult and far more joint torque, and it is research equipment: the industrial robot safety standards — ISO 10218 and the ANSI/RIA R15.06 family — and the mobile robot standard R15.08 do not cover it, so the duty of care sits entirely with you.
At minimum: a marked working area that untrained people cannot enter, a trained operator holding the emergency stop whenever the robot is powered, a support gantry during locomotion development, and a written risk assessment before any public demonstration. A fall from this robot can injure a bystander and will damage the robot. Treat it with the discipline you would give a full-size industrial manipulator, because that is what it is.
Lithium batteries are regulated dangerous goods in transit, which affects how spares ship and how quickly.
Deployment and running costs
Plan the site before the robot arrives. A full-size humanoid needs floor space with a marked working envelope, a route in that accommodates roughly 70 kg of crated machine, and somewhere secure to store and charge it. Budget for a spare battery — runtime is about three hours, which is generous for a humanoid but still finite — and a support gantry if you are developing locomotion. End-effector spares matter more here than on any cheaper platform, because the hands on the upper configurations are worth more than entire robots further down the range. Related parts are listed under robot accessories. International buyers should add duty and import charges. Current pricing is shown on the listing above; for quantities, grant purchases or bundles, request a written quotation.
Import and delivery
Units ship from the manufacturer and lead times follow production batches rather than a fixed schedule. This is a heavy, bulky crate and the lithium battery restricts some routes and adds documentation. Tell us the destination country when you enquire and we will confirm delivered cost, a realistic lead time and the paperwork required before you commit. For a purchase at this level we recommend settling delivery terms in writing before the order is placed.
Support before and after the sale
Before you buy, our team will check whether you need the Jetson Thor module at all, and whether the Ultimate A is worth the small step up for factory-fitted grippers. Both questions are easy to get wrong from a price list. After delivery, we help with training, set up and ongoing support. The specifics for your order are confirmed on your quotation.
Where to buy
This configuration is listed above with current price and availability, alongside the rest of the H2 Plus range so you can compare before committing. Order directly, or contact our team for a formal quotation including delivery to your country. At this price level most buyers purchase against a written quotation and a purchase order, and we would encourage that.
Frequently asked questions
How much does a Unitree H2 Plus SMART cost?
Current pricing is shown on the listing above. Request a quotation for delivered pricing or quantities.
What does SMART add over the Standard?
An NVIDIA Jetson Thor module with 128 GB LPDDR5X and triple onboard compute, split across platform control, user development and AI workloads.
Does SMART include hands?
No. It is supplied without dexterous hands. The Ultimate configurations come with them fitted.
Should I buy SMART or Ultimate A?
Ultimate A is the same robot with Dex1-1 Advanced grippers fitted, for a modest step up in price. If you want working hands at all, it is usually the better buy.
How tall is the H2 Plus?
It stands 1,820 mm, so about 1.82 m, and weighs roughly 70 kg with battery.
How many joints does the body have?
31 — 7 in each arm, 6 in each leg, 3 at the waist and 2 in the head. Hands add to that total.
How much can it carry?
7 kg rated and 15 kg at peak.
How long does the battery last?
About three hours from a 15 Ah smart quick-release battery.
What is the difference between Standard, SMART and Ultimate?
Standard is the bare platform on dual Intel computing. SMART adds an NVIDIA Jetson Thor module with 128 GB LPDDR5X and triple onboard compute. Ultimate is a SMART-class robot supplied with one of fourteen hand packages.
Is it safe around people?
Only with a marked working area, a trained operator on the emergency stop and a written risk assessment. This is a 70 kg machine with 360 N·m leg joints and it is not covered by the industrial robot safety standards.
Is it open for development?
Yes. It ships with documented interfaces for secondary development.
Do you ship internationally?
Yes. The crate is heavy and the lithium battery affects routing, so confirm the destination country when you enquire.