PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003)

Picture a hotel corridor at the end of a busy evening: crumbs scattered across the tiles, grit carried in from the entrance, and a strip of carpet holding fine dust that no broom will lift. Cleaning robots have traditionally been built for one half of that picture, either a sweeper for visible debris or a vacuum for fine particles, leaving facility teams to decide which mess matters more. The PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003) is designed to avoid that choice. It combines sweeping, vacuuming and dust mopping in one autonomous platform that recognises carpet and hard floors in real time and adjusts its suction and brush speed to match.

The PUDU MT1 Vac is available through this page by quotation, with configuration and options confirmed for each project.

Background

PUDU ROBOTICS and the MT1 family

PUDU ROBOTICS develops service robots for commercial settings. Its range covers delivery and reception as well as floor care, and the company has built its cleaning portfolio around the operational realities of large public spaces: long routes, mixed surfaces and staff who need equipment that runs without constant supervision. The sources for this product name three versions in the MT1 family: the MT1 Vac described on this page, the original MT1 and the MT1 Max. The figures in this article belong to the MT1 Vac alone. The fact sheet provides no figures for the MT1 or the MT1 Max, so any comparison of specifications between versions should be requested at quotation rather than assumed.

Where the MT1 Vac sits: between wet cleaning and heavy debris

According to the published positioning, the MT1 Vac sits between the wet-cleaning-focused CC1 series and the original MT1 sweeper, which targets large debris. In practical terms, it is the dry-cleaning model for facilities that need more than a sweeper but do not require scrubbing with water. The key technology behind that role is its AI-powered floor recognition. The robot distinguishes carpet from hard floors as it moves and automatically changes suction and brush speed, so a single route can cross a lobby, a carpeted meeting area and a tiled corridor without manual mode changes.

Technical Specifications

Apart from the cleaning capabilities, floor recognition and modular parts, these figures come from a single published specification and are confirmed against the manufacturer's datasheet at quotation.

How does the PUDU MT1 Vac differ from the MT1 and the CC1 series?

The difference is mainly one of purpose rather than of individual figures. The published positioning places the CC1 series on the wet-cleaning side and the original MT1 on the side of large debris pickup. The MT1 Vac covers the ground in between. Its three cleaning modes address different types of dirt: sweeping handles loose litter, vacuuming lifts fine dust and particles embedded in carpet, and dust mopping picks up the fine film left behind on hard floors. A site that mainly deals with spills and sticky residue is closer to the profile of the CC1 series. A site where the typical problem is bulky debris is closer to that of the original MT1.

Because the fact sheet carries no published figures for the MT1 or the MT1 Max, this page makes no specification comparison between them. Anyone weighing the MT1 Vac against a sibling should request both datasheets with the quotation and compare widths, run-times and capacities version by version.

How does the MT1 Vac handle changing floors and dust control?

Many commercial buildings alternate between surfaces every few metres: tile at the entrance, carpet in waiting areas and vinyl in service corridors. A robot set up for a single surface either under-cleans the carpet or wastes energy and wears its brushes on hard floors. The MT1 Vac's floor recognition addresses this directly by detecting the surface in real time and adjusting suction and brush speed without operator input.

Dust control is the second part of the answer. The published air filtration level is H11, with H13 listed as an option. That option is relevant for sites where the air expelled by a vacuum matters, such as healthcare waiting areas or offices with occupants sensitive to airborne dust. The required filtration grade should be specified when requesting a quotation. Collection capacity is reported as a 14 L dust bag, made up of two 7 L bags, alongside a 6 L trash bin for swept debris.

Maintenance has been designed to be quick. The dust mop, dustbin, trash bin, roller brush and side brushes can be swapped in seconds without tools, which keeps downtime short and allows staff to change consumables between shifts without technical training.

Who is the PUDU MT1 Vac for?

The MT1 Vac suits operators of large indoor spaces where dry debris is the daily problem and floor types are mixed. Facility managers in office towers, hotels, shopping centres, transport terminals, conference venues and education campuses are typical evaluators, as are cleaning contractors looking to automate repetitive routes so that staff can concentrate on detailed tasks. Planners should note the reported minimum path clearance of 75 cm (29.53 in) when mapping narrow corridors and furniture layouts, and check the reported weight of 75 kg (165.35 lbs) against any lift or floor-loading constraints.

Not every site is the right fit. Where wet cleaning of spills and residue dominates, the published positioning points towards the CC1 series. Where large debris is the main concern, the original MT1 is presented as the closer match. The fact sheet also names an MT1 Max but publishes no figures for it, so buyers considering it should ask for its datasheet at quotation.

What is the PUDU MT1 Vac used for?

1. Hotel corridors and lobbies: routine dry cleaning across carpeted hallways and hard-floor reception areas on a single route.
2. Office floors: scheduled vacuuming of open-plan carpet combined with dust mopping in kitchens and corridors.
3. Shopping centres: sweeping of litter and grit in concourses where foot traffic is constant.
4. Transport terminals: repeated passes over large waiting areas, assisted by combined VSLAM, marker and LiDAR SLAM navigation.
5. Conference and event venues: fast recovery of carpeted halls between sessions without redeploying cleaning staff.
6. Healthcare and education buildings: dry cleaning with H11 filtration, or the optional H13, where airborne dust is a concern.

Pricing and Availability

Pricing for the PUDU MT1 Vac is provided by quotation, prepared for the configuration you specify, including the filtration grade and any spare modular parts. Delivery, customs and support are arranged together with the quotation. To begin, submit your site details and preferred options; the PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003) is available on this page.

Frequently Asked Questions

Can the MT1 Vac clean both carpet and hard floors?

Yes. Its AI-powered floor recognition identifies carpet and hard floors in real time and adjusts suction and brush speed automatically.

Which cleaning modes does it offer?

The MT1 Vac offers sweeping, vacuuming and dust mopping. It is a dry-cleaning robot; the published positioning places wet cleaning with the CC1 series.

How long does it run on a charge?

The reported run-time is 3–6.5 h, with 4h in standard sweep and vacuum mode on hard floors. Battery capacity has not been published and is confirmed at quotation.

How does it navigate?

Per the published specification, it combines VSLAM, markers and LiDAR SLAM. Its reported minimum path clearance is 75 cm (29.53 in).

What filtration does it use?

The published air filtration level is H11, with H13 available as an option. The grade you require should be stated when requesting a quotation.

Is the robot waterproof, and how loud is it?

The manufacturer has not published an IP rating or a noise level for the MT1 Vac. Both are confirmed against the datasheet at quotation.

Where can I buy the PUDU MT1 Vac Al-powered Robotic Sweeper & Vacuum (10251-000003) and what does it cost?

It is available through this page by quotation. The cost depends on configuration and options and is set out in the quotation, together with delivery, customs and support arrangements.

Summary

The corridor with crumbs on the tiles and dust in the carpet no longer forces a choice between a sweeper and a vacuum. The PUDU MT1 Vac brings sweeping, vacuuming and dust mopping together, reads the floor beneath it and adjusts suction and brush speed as surfaces change. Positioned between PUDU ROBOTICS' wet-cleaning CC1 series and the large-debris MT1, it offers reported 55 cm vacuuming and 70 cm sweeping widths, combined SLAM navigation, H11 filtration with an H13 option, and modular parts that can be swapped without tools. Specifications the manufacturer has not yet published are confirmed at quotation. For facilities ready to automate mixed-floor dry cleaning, this page is the starting point.